[. . . ] Children should be supervised to ensure that they do not play with the appliance. The voltage of your electrical installation must correspond to the one of the iron (220V-240V). Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee. [. . . ] Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee. If using a mains extension lead, ensure that it is correctly rated (10A), with an earth connection. If the electrical cord becomes damaged, it must be immediately replaced by an Approved Service Centre to avoid any danger. The appliance should not be used if it has fallen, if it has obvious damage, if it leaks or if it functions incorrectly. Never dismantle your appliance: have it inspected by an Approved Service Centre, so as to avoid any danger. Always unplug your appliance: before filling or rinsing the water tank, before cleaning it, after each use. Never leave the appliance unattended when it is connected to a power source and if it has not cooled down for approximately 1 hour. This system will help to provide: a better ironing quality with a constant flow of steam, lasting performance from your appliance. 12  , 0;; )0%B[   3DJH ฀ ฀ ฀ ฀ ฀ The chosen temperature is too low and does not allow for the formation of steam. You have stored the iron horizontally, without emptying it and without setting it to . Too Position the thermostat in the steam range (from •• to MAX). Brown streaks come through the holes in the soleplate and stain the linen. perform a self-cleaning operation and consult the section "What water to use?" Fabric fibres have accumulated in the holes of the soleplate and are burning. [. . . ] Brown streaks come through the holes in the soleplate and stain the linen. perform a self-cleaning operation and consult the section "What water to use?" Fabric fibres have accumulated in the holes of the soleplate and are burning. [. . . ]